Treatex Classic Colour Collection

£17.00£28.00

Plus VAT per product

Treatex Classic Colour Collection is a high quality opaque wood finish which has been tried and tested in extreme conditions such as on the coast and in the mountains. This product is manufactured on a base of natural sustainable raw materials including: sunflower oil, soybean oil, beeswax and carnauba wax. Treatex Classic Colour Collection can be used on all types of timber and is the ideal finish for doors, windows, fences, sheds, cladding, kitchen cabinets and other interior or exterior joinery.

Please note: Delivery is 5 working days subject to stock

 

Clear
SKU: N/A Category:

Treatex Classic Colour Collection can be used on all types of timber and is the ideal finish for doors, windows, fences, sheds, cladding, kitchen cabinets and other interior or exterior joinery.

Additional information

Colour

Admiralty Grey, Ash Bark Green, Battleship Grey, Black, Bleached Wood, Burgundy Red, Cool Cotton, Forest Green, Fresh Lemon, Granny's Bonnet, Heather Haze, Is This Pink?, Midnight Blue, Muntjac, Old Pewter, Saddle Brown, Sage Green, Sea Mist, Stygian, Symphony Blue, Terracotta

Size

0.5L, 1L

Product Features

  • Easy to apply

  • High coverage

  • UV resistant

  • Will not flake or peel

  • Contains no biocides or preservatives

  • Highly water resistant

  • Safe for use on Children’s toys EN71/3 DIN 53160

  • Can be used in a wide range of applications

Usage/Coverage

Suitable for: internal and external use
Recommended timbers: All
Applications: doors, windows, fences, sheds, cladding, tables, kitchen cabinets and flooring (2 coats of hardwax oil recommended if using with a floor).

0.5L covers approximately 12.5m² in one coat or 7.5m² in two coats depending on the timber and method of application*
1L covers approximately 25m² in one coat depending on the timber and method of application*

*Rough sawn timbers will increase consumption by a factor of 2 to 3. It is advisable to sand the timber surface first to create a smoother area to apply to OR speak to one of the Team at Treatex to discuss further options to improve coverage.

Application

Preparation

Treatex Classic Colour Collection works best on unfinished timber. Previous porous finishes should be thoroughly cleaned or lightly sanded before overcoating. Flaking or peeling finishes must be fully removed prior to application. A trial application is essential when overcoating another finish. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc. Exterior timbers susceptible to decay, mould and fungi should be treated first with Treatex Preservative. To help prevent staining, exterior timbers with high tannin levels (e.g. oak, idigbo, teak, cedar, mahogany) should be treated with Treatex Stain Inhibitor. We advise that when using Treatex Classic Colour Collection, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. Timber must have a moisture content below 18%. Temperature must be between 8°𝖼 and 25°𝖼 during application and drying. We strongly recommend a trial application prior to starting the project.

Application

Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex Classic Colour Collection in the same direction as the wood grain. If possible, apply the first coat to all sides of the wood before installation. Pay particular attention to any end grain. To ensure the timber is fully sealed apply the product liberally on end grain. After approximately 12 hours drying the first coat can be overcoated. Apply with a brush or roller a second coat of Treatex Classic Colour Collection. After the second coat, leave for approximately 12-24 hours to dry. A third coat may be needed if applying a light colour on a dark timber. One coat may be enough when renovating previously porous finishes.

Advice

We also stock Treatex brushes and rollers. Wet brushes and rollers can be cleaned with Treatex Thinner or white spirit. Store tins in a cool and frost free environment. Unopened tins will last for five years. Once tins are opened, transfer contents to smaller airtight container. For a different sheen level on internal timbers Treatex Classic Colour Collection can be overcoated with Treatex Hardwax Oil Clear Matt, Flat Matt, Satin or Gloss.