Name: Osmo Wood Wax Finish
SKU: 3794
Availability: InStock

Transparent coloured wood finish that uniquely combines the advantages of natural oils and waxes in one product. Osmo Wood Wax Finish is stain-resistant, water-repellent and abrasion-resistant and results in a surface that is pleasant to the touch. In comparison to conventional finishes, the use of plant ingredients creates a more even colour and more harmonious appearance.

Osmo Wood Wax Finish is suitable for the protection and the decorative finishing of wood in indoor areas: wall panelling, mouldings and beams as well as doors. It is also suitable for edge-glued panels, chipboard and MDF. Ideal as a coloured base coat for wooden flooring and for recoating darkened wood surfaces. Highly recommended for furniture and children’s toys.

Suitable for all interior use
Wood grain remains visible with transparent tones and wood grain can be hidden with intensive tones
Very durable and hardwearing
Water and dirt resistant
Resistant to common liquid spillages such as wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with German DIN 68861-1A – no water spots
Saliva-resistant and sweatproof, suitable for children’s toys
Microporous, breathable finish which does not crack, peel or flake
No sanding necessary for spot repairs or future applications

INFORMATION

Approx. coverage: 24m²/L with one coat
No. of coats: 1-2
Application temperature: +5°C
Drying time: 24 hrs.
Sizes: 0.375L, 0.750L, 2.5L

Additional information

Size	0.375L, 0.75L, 2.5L
Colour	Birch, Cherry, Clear, Cognac, Ebony, Granite Grey, Grey Beige, Light Oak, Light Steamed Beech, Mahogany, Oak, Oak Antique, Pine, Silk Grey, Walnut, White

Application

SURFACE PREPARATION
The wood surface must be clean, dry and frost-free (max. 18% moisture content). Osmo Wood Wax Finish is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with wood filler). Sand wood surface carefully, begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P220-240. Before applying oils, remove sanding dust from the surface by sweeping or vacuuming. If possible, please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

METHODS OF APPLICATION
Transparent colour (one coat): with flat brush, applicator or microfibre roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well. For a more subtle stained effect, apply thinly with a lint-free cloth and within 20 minutes, wipe away cleanly and evenly. Ventilate well while drying.

Note: Larger areas can also be coated by using a scraper. Afterwards rub in with a white pad. Important: For mechanically loaded areas, e.g. flooring, we recommend max. one coat and generally a thin top coat with clear Osmo Polyx®-Oil Original. For white flooring, a top coat with light white pigments Osmo Polyx®-Oil Tints 3040 White.

DRYING TIME
Approx. 24 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.

COVERAGE
1 litre covers approx. 24 m² with one coat. Coverage depends significantly on the condition of the wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may lead to differences in coverage.

NOTE
Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil. Choose colour tones that match the natural tone of wood or a darker colour tone (trial application). Oils enhance the natural colour tone of wood (permanent wet effect). For dark and extractive-rich hardwoods (e.g. Wenge, Mahogany, Merbau etc.), we recommend applying Osmo Wood Wax Finish Clear Extra Thin. Trial application is recommended. Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth.

Advice

For resinous wood species, use Osmo Wood Wax Finish Clear Extra Thin.
Two coats can be applied on wooden furniture, doors and joinery, but only one coat on flooring – as a second coat of Osmo Polyx®-Oil is required.
Wood grain remains visible with ‘transparent’ tones and wood grain is hidden (after two coats) of ‘intensive’ tones.
When using 3111 White as the first coat on flooring, a second coat of 3040 White from Polyx®-Oil Tints is recommended to avoid yellowing.
Recommended application amount is 35 ml/m²
Lightly coloured glazing effect: within 20 minutes after applying the coat, wipe with a cloth or a white pad along the wood grain.
As a colouring primer for flooring: Leave to dry for approx. 24 hrs to allow pigmentation to cure before applying second coat with Osmo Polyx®-Oil.
For alternative colour tones, see Osmo Polyx®-Oil Tints.
Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.
Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining.
Be cautious if applying Clear Matt over a dark coloured surface such as Ebony or Black. The matting agents within Clear Matt may produce a white mist or powdery effect upon the surface. It is recommended to apply Semi-Matt if a sheen is not desired. Always trial apply!

Suitability

POSSIBLE

Maple apply very thinly and carry out a trial application before use.
American/European Walnut apply very thinly and carry out a trial application before use.

NOT RECOMMENDED

Cedar Wood Wax Finish Clear Extra Thin is instead recommended.
Iroko Wood Wax Finish Clear Extra Thin is instead recommended.
Mahogany Wood Wax Finish Clear Extra Thin is instead recommended.
Teak Wood Wax Finish Clear Extra Thin is instead recommended.
South American Walnut Wood Wax Finish Clear Extra Thin is instead recommended.
Sapele Wood Wax Finish Clear Extra Thin is instead recommended.
Bamboo Wood Wax Finish Clear Extra Thin is instead recommended.
Acacia Wood Wax Finish Clear Extra Thin is instead recommended.
Ipe Wood Wax Finish Clear Extra Thin is instead recommended.
Merbau Wood Wax Finish Clear Extra Thin is instead recommended.
Ebony Wood Wax Finish Clear Extra Thin is instead recommended.
Wenge Wood Wax Finish Clear Extra Thin is instead recommended.
Ipe Wood Wax Finish Clear Extra Thin is instead recommended.
Sycamore Wood Wax Finish Clear Extra Thin is instead recommended.
Rosewood Wood Wax Finish Clear Extra Thin is instead recommended.
Green Oak moisture content is often above the maximum 20% recommended.
Idigbo contains yellow dyes which leaches when the wood becomes wet and stains when in contact within iron.
Other woods treated with a varnish, lacquer or other surface coatings must be completely sanded before use.

For all other wood species, always trial apply.

Product Information

Please see below for product, technical and safety information from Osmo.

Wood Wax Finish – Product Information

Wood Wax Finish – Safety Information