Clear or transparent, fast drying wood finish for the intitial and routine care of oiled/waxed wooden floors. Dull and matt flooring is refreshed with Osmo Maintenance Oil. By applying Maintenance Oil at the right time, time-consuming sanding works and renovation can be avoided. Also suitable for changing the gloss level of intact surfaces treated with Osmo Polyx-Oil.
Osmo Maintenance Oil is ideal for the maintenance of all wooden flooring treated with Polyx®-Oil, such as solid wood, plank, parquet, strip, OSB and cork flooring, as well as stairs and furniture surfaces. Highly recommended for public interiors (e.g. restaurants, museums and other high traffic floors).
- Ideal for public and commercial use
- Fast drying
- Cleans and regenerates the wood at the same time
- Removes tough stains such as grease and shoe polish
- Maintains protected surfaces without wear of treatment
- Occasional maintenance without the need for sanding
- Suitable for wood; microporous surface will not crack, peel, flake or blister
- Resistant against wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with German DIN 68861-1A – no water spots.
INFORMATION
- Approx. coverage: 40-60m²/L with one coat
- Application temperature: +5°C
- Drying time: 3-4 hrs
- Sizes: 1L
Application
SURFACE PREPARATION
Wood surface must be clean, dry (moisture content max. 18 %) and free of dust. Osmo Maintenance Oil is ready to use. Do not thin. Stir well before use. Clean the surface thoroughly with Osmo Intensive Cleaner and rinse (damp mopping) with clear water. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
METHODS OF APPLICATION
With a scraper or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad (do not rub in Clear Semi-Matt). Remove excess product. For smaller areas, Osmo Maintenance Oil can be applied with a lint-free cloth. Allow for good ventilation while drying.
DRYING TIME
Approx. 3-4 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Ventilate well while drying.
COVERAGE
1 litre covers approx. 40-60 m² with one coat. Coverage depends significantly on the condition of the wood. All information refers to smooth and planed/sanded surfaces. Other surfaces may lead to differences in coverage.
NOTE
The maintenance results are influenced by several factors, including the condition of wood. Therefore, a trial application is always required. If wood is raw or already greyed, the surface must be sanded and treated with Osmo Polyx®-Oil. Do not rub in Maintenance Oil Semi-Matt/Anti-Slip with a single disc machine.
