Osmo Intensive Cleaner


Plus VAT per product

Highly effective, alkaline based concentrated cleaner for the removal of organic and inorganic soiling on interior or exterior surfaces. The ideal alternative to sanding wood surfaces finished with oils and waxes for intensive cleaning and restoration. Osmo Intensive Cleaner does not contain aggressive or corrosive alkalis.

Please note: Delivery is 5 working days subject to stock



SKU: N/A Category:

Highly effective, lightly alkaline special cleaner for removing organic and inorganic deposits in indoor and outdoor areas. Ideal for intensively cleaning oiled and waxed surfaces before the actual surface treatment with Osmo finishes.

Osmo Intensive Cleaner is ideal as an alternative to sanding all wooden surfaces treated with oils and waxes, e.g. flooring or furniture, and also suitable for cleaning plastics, stainless steel and other waterproof surfaces.

  • Highly effective intensive cleaning
  • Restoration of wood surface without sanding
  • Easy application
  • Ideal for public and commercial use
  • Can be used for interior and exterior


  • Product code: 8019
  • Approx. dosage: 1:10 to 1:20 with water
  • Drying time:  Wipe dry
  • Approx. coverage:  30-100 m²/L
  • Sizes: 1L, 5L

Additional information


1L, 5L


Remove loose debris from the surface with a firm broom or hand broom. Dilute the concentrate from 1:10 to 1:20 with water. A trial application is absolutely necessary.

Apply cleaning solution to the dirty area, loosen dirt deposits and afterwards remove these with clear water. For machine applications on flooring, we recommend the use of a single disc machine with a brush ring, a red or green pad. Remove dirt deposits with a microfibre mop or a lint-free cotton cloth. After drying, recoat oiled or waxed surfaces with an appropriate Osmo wood finish, e.g. Osmo Polyx®-Oil.

Before beginning with surface treatment, allow cleaned surface to dry thoroughly and completely, at least 3-4 hours.

Do not use undiluted. Osmo Intensive Cleaner may lead to discolourations or surface changes on unfamiliar subsurfaces. Woods rich in extractives (in particular Oak) discolour when coming in contact with undiluted Intensive Cleaner. Even when diluted, always carry out a trial application. Avoid allowing the solution to dry. Not suitable for daily cleaning and maintenance.


  • Never apply undiluted. Dilute concentrate 1:10 to 1:20 with water.
  • Can also remove top coats of oils and waxes but is not a direct alternative to sanding as Intensive Cleaner is for intensive cleaning purposes only.


Harmful: Xi: irritant. Irritating to eyes and skin.

Contains: Disodium metasilicate. Causes skin irritation. Causes serious eye damage. Reacts with acids with evolution of heat. Risk of splashing! The general safety regulations when handling chemicals must be observed.
Caution: Keep out of reach of children. Read label before use. Wear protective gloves/eye protection. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on skin: Wash with plenty of soap and water. If medical advice is needed, have product container or label at hand.

Product Information

Please see below for product, technical and safety information from Osmo.

Intensive Cleaner – Product Information

Intensive Cleaner – Safety Information